|
HT82J30R/HT82J30A -- 16 Channel A/D MCU with SPI Interface
General Description
The HT82J30R and HT82J30A are 8-bit high performance,
RISC architecture microcontroller devices specifically designed for A/D applications that interface
directly to analog signals, such as those from sensors.
The HT82J30A mask version type is fully pin and functionally
compatible with the HT82J30R OTP version device.
The advantages of low power consumption, I/O flexibility,
programmable frequency divider, timer functions, oscillator options, multi-channel A/D Converter, Pulse
Width Modulation function, Watchdog timer, SPI interfaces, Power Down and wake-up functions, enhance
the versatility of these devices to suit a wide range of A/D application possibilities such as sensor signal processing,
motor driving, industrial control, consumer products, subsystem controllers, etc.
With the provision of dual SPI interfaces the devices are
especially suitable for Joystick Encoder applications.
|
Features
- Operating voltage:
fSYS=4MHz: 2.2V~5.5V crystal clock mode
fSYS=12MHz: 2.7V~3.7V RC clock mode
- 35 bidirectional I/O lines
- Dual external interrupt inputs shared with I/O lines
- Single 8-bit programmable Timer/Event Counters
with overflow interrupt and 7-stage prescaler
- Watchdog Timer function
- PFD for audio generation
- Power down and wake-up functions to reduce power consumption
- Crystal and RC oscillator
- 16 channel 8-bit resolution A/D converter
- Single channel (6+2)-bit PWM output shared with an
I/O line
- Up to 0.33us instruction cycle with 12MHz system
clock at VDD= 5V
- 6-level subroutine nesting
- Bit manipulation instruction
- Table read instructions
- 63 powerful instructions
- All instructions executed in one or two machine
cycles
- Low voltage reset function
- Dual Integrated SPI interfaces
- Pins PB2, PB3, PD4, PD7 can be setup as either
CMOS or NMOS outputs using configuration options
- 28-pin SKDIP/SOP and 44-pin QFP packages
|
|
Technical Document |
|
|
Other Information
|
|
|
|
|